Audio Research has now announced the release of its new Reference 6 (REF 6) line stage preamplifier. The new REF 6 line stage continues in the tradition of Audio Research’s constant pursuit of High Definition music playback.
The Reference Series from Audio Research was first introduced in 1995 and since has represented the company’s ultimate representation of performance, musicality and power. Like previous Reference Series components, the new Reference 6 incorporates the most refined circuit designs in concert with the highest quality parts and components. Numerous elements – transformers, capacitors, wiring – are designs exclusive to Audio Research and the Reference 6. An all new chassis offers more structural rigidity to assist in the dissipation of electrical and mechanical interference. The new design now leverages six premium 6H30 tubes within the audio circuit, up from the four used in the previous Reference 5SE. The additional two tubes provide for an even quieter background and increased dynamic range. The tube-regulated power supply is also a new design for improved sonics. New circuit boards, circuit designs, and larger power transformer have been implemented to provide robustness and serviceability. A new volume control with finer step gradation and higher performance completes the system.
The new series of Reference amplifiers offer a level of musical and dynamic capability only made apparent when using the flagship, two-chassis Reference 10 preamplifier. Both preamplifiers of the Reference Series need the ability to provide the full benefit of this new sonic landscape. Increasing the tube count to six in the analog section, and advancements in the power supply improved both macro- and microdynamics and lowered distortion. The REF 6 also offers better bass control, relaxed purity and more dimensionality. Further improvements include a more grainless presentation, greater transparency, better speed, and more continuity across the musical spectrum. Quite simply, the Reference 6 improves upon its predecessor in every way for a more palpable and immediate musical performance.
The REF 6 line stage preamplifier is housed in a single chassis paneled in custom-machined aluminum. The vacuum tube audio stage utilizes six 6H30 vacuum tubes (three per channel), and one 6H30 and a 6550WE provide regulation in the power supply. The large, vacuum fluorescent display on the front panel shows all functions and volume. Two rotary encoders provide input selection and volume control, and a row of five buttons control power, mute, invert, mono and menu controls. Menu functions include: input labeling, display brightness, processor input setup and tube hour reset. Four balanced and four single-ended inputs provide system connectivity. There are two main outputs providing both balanced and single-ended, as well as a record out. RS-232, IR input, and 12V trigger allow for additional control options. The REF 6 ships with a full-function metal remote.
KEY FEATURES & SPECIFICATIONS:
•Frequency Response: +0-3dB, 0.5Hz to 200kHz at rated output (Balanced, 200k ohms load).
•Distortion: Less than .01% at 2V RMS BAL output.
•Gain: Main output: 12dB Balanced output, 6dB SE output. Record out: 0dB (Processor input: 0dB SE output).
•Input Impedance: 120K ohms Balanced, 60K ohms SE. Inputs 4 balanced, 4 single-ended. Assignable processor passthrough.
•Output Impedance: 600 ohms Balanced, 300 ohms SE Main (2). 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 main, 1 record out (XLR and RCA connectors).
•Output Polarity: Non-inverting.
•Maximum Input: 20V RMS BAL, 10V RMS SE.
•Rated Outputs: 2V RMS (1V RMS SE) into 200K ohm balanced load (maximum balanced output capability is 30V RMS at less than 0.5% THD at 1kHz).
•Crosstalk: -80dB or better at 1kHz and 10 kHz.
•Controls: Rotary encoders: Volume (103 steps), Select Input. Push Buttons: Power, Proc, Menu, Enter, Mono, Invert, Mute.
•Power Supplies: Electronically regulated low and high voltage supplies. Automatic 45 sec. warm-up/brown-out mute. Line regulation better than .01%.
•Noise: 1.7uV RMS residual IHF weighted balanced equivalent input noise with volume at 1 (109dB below 2V RMS output.)
•Tube Complement: (6)-6H30P dual triodes, plus (1 each) 6550C and 6H30P in power supply.
•Power Requirements: 100-135VAC 60Hz (200-270VAC 50/60Hz) 130 watts. Standby: 2 watts.
•Dimensions:
Width 19” (48 cm)
Height 7.8” (19.8 cm)
Depth 16.5” (41.9 cm)
Handles extend 1.6” (4 cm) forward of the front panel.
•Weight: 36.5 lbs. (16.6 kg) Net; 53 lbs. (24 kg) Shipping.
The new Audio Research Reference 6 (REF 6) line stage premaplifer is currently available. Look for more details at: http://www.audioresearch.com
About the Author: George de Sa
